angular contact ball bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.
- 80 mm x 110 mm x 16 mm SKF 71916 ACD/HCP4A angular contact ball bearings
- 0.7500 in
- 2890 lbf
- 100 mm x 140 mm x 20 mm FAG HCB71920-E-2RSD-T-P4S angular contact ball bearings
- 2.9375 in
- 7.8800 to 9.6300 in
- 65 mm x 140 mm x 58,7 mm NKE 3313-B-2RSR-TV angular contact ball bearings
- 70 mm
- Chrome Steel
- 40 mm x 62 mm x 12 mm SNFA HB40 /S/NS 7CE3 angular contact ball bearings
- 1.1875 in
- 4410 lbf
- 15 mm x 42 mm x 13 mm NTN 7302B angular contact ball bearings
- 1.0000 in
- 2680 lbf
- 40 mm x 80 mm x 18 mm ISO 7208 A angular contact ball bearings
- 1.0000 in
- Duralon Filament
- 45 mm x 68 mm x 12 mm SKF 71909 ACD/P4A angular contact ball bearings
- 1.4375 in
- 5820 lbf
- 38 mm x 70 mm x 37 mm FAG SA0055 angular contact ball bearings
- 1.2500 in
- 3460 lbf
- 65 mm x 120 mm x 23 mm NSK 7213BEA angular contact ball bearings
- 7/8 in
- -35 °F to +300 °F
- 130 mm x 230 mm x 40 mm SIGMA 7226-B angular contact ball bearings
- Two-Bolt Base
- 200 °F