angular contact ball bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.
- 635 mm x 654,05 mm x 9,525 mm KOYO KCX250 angular contact ball bearings
- 1.4375 in
- 7530 lbf
- ISO 7000 CDT angular contact ball bearings
- 0.9375 in
- 3150 lbf
- 70 mm x 110 mm x 20 mm NTN 5S-HSB014C angular contact ball bearings
- 0.8750 in
- 2680 lbf
- 120 mm x 165 mm x 22 mm KOYO 3NCHAR924C angular contact ball bearings
- 1.0000 in
- 2150 lbf
- ISO 7215 CDT angular contact ball bearings
- 3 in
- 4000 psi
- 10 mm x 26 mm x 8 mm KOYO 7000 angular contact ball bearings
- 2.3750 in
- 20800 lbf
- 65 mm x 90 mm x 13 mm KOYO 3NCHAR913CA angular contact ball bearings
- 2.1875 in
- 5-7/8 in
- 150 mm x 270 mm x 45 mm NACHI 7230B angular contact ball bearings
- 1.9375 in
- 13900 lbf
- 75 mm x 115 mm x 20 mm KOYO HAR015CA angular contact ball bearings
- 1.4375 in
- 5820 lbf
- ISO QJ328 angular contact ball bearings
- 1.8750 in
- Cast Iron
- 110 mm x 150 mm x 20 mm SNFA VEB 110 /NS 7CE3 angular contact ball bearings
- 3.9375 in
- 4.7500 in