| Design Units | METRIC |
| d | 85 mm |
| Limiting Speed (Oil) | 21600 rpm |
| Ball Type | STEEL |
| R - Inner Ring To Clear Radius2 | 1.0 mm |
| Limiting Speed (Grease) | 10800 rpm |
| Cage Type | CR - Phenolic Outer |
| Bearing Width | 18 mm |
| C0 - Static Radial Rating | 37500 N |
| Ce - Dynamic Radial Rating1 | 38700 N |
| r - Outer Ring To Clear Radius3 | 1.0 mm |
| D | 120 mm |
| da - Inner Ring Backing Diameter | 92.800 mm |
| Da - Outer Ring Backing Diameter | 112.700 mm |
| Bearing Weight | 0.56 Kg |
| do - Ball Diameter | 9.525 mm |
| Contact Angle | 15 º |
Compare similar High Precision Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | C | D | a | B | D6 | f0 | C0 |
| S71904 CE/P4A | SKF | 20 mm | - | 37 mm | 8.5 mm | 9 mm | - | - | - |
| S71904 ACD/HCP4A | SKF | 20 mm | 5,72 kN | 37 mm | 11.2 mm | 9 mm | - | - | 3,05 kN |
| S71904 ACD/P4A | SKF | 20 mm | - | 37 mm | 11.2 mm | 9 mm | - | - | - |
| S71904 ACE/HCP4A | SKF | 20 mm | - | 37 mm | 11.6 mm | 9 mm | - | - | - |
| S71904 ACE/P4A | SKF | 20 mm | - | 37 mm | 11.6 mm | 9 mm | - | - | - |
| S71904 CD/HCP4A | SKF | 20 mm | - | 37 mm | 8.4 mm | 9 mm | - | - | - |
| S71904 CD/P4A | SKF | 20 mm | - | 37 mm | 8.4 mm | 9 mm | - | - | - |
| S71904 CE/HCP4A | SKF | 20 mm | - | 37 mm | 8.5 mm | 9 mm | - | - | - |
| MLE71904CVDUJ74S | SNR | 20 mm | 18 mm | 37 mm | - | 18 mm | - | - | - |
| MLE71904CVUJ74S | SNR | 20 mm | 9 mm | 37 mm | 9 mm | 9 mm | 26.6 mm | 7.88 | - |
| MLE71904HVDUJ74S | SNR | 20 mm | 18 mm | 37 mm | - | 18 mm | - | - | - |
| VCM7013-E-2RSD-T-P4S-XL FAG high precision ball bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12100 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:85800 lbf; Aa - Cage-Cone Backface Clearance:0.05 in; Cage Type:Stamped Steel; C0 - Static Radial Rating:162000 lbf; Cg - Geometry Factor:0.114; C90(2) - Dynamic Radial Rating (Two-R |
| VCM7008-E-2RSD-T-P4S-XL FAG precision ball bearings | Shaft Size:5.75 in; Bearing UPC:013992059284; Bearing Type:Split Cylindrical Re; Dimension R:2.0 in; Bearing - Housing - Seal:LSE512BRHKPS; Dimension A:11.0 in; Dimension V:8.0 in; Dimension N:18.3 in; Support Type:Take-Up; Maximum Speed:1450 rpm; Tensioning Unit Type:Tension Type; Dimension B:10.5 |
| VCM7005-E-2RSD-T-P4S-XL FAG precision ball bearings | Da (max):55 mm; dd (min):40 mm; Dynamic Load Rating:42,500 N; Enclosure:Open; ra1 (max):1 mm; D:62 mm; d:25 mm; db (max):33 mm; Configuration:Single Row; dc (min):37 mm; B:24 mm; Limiting Speed - Oil:11,000 rpm; r1:1.1 mm; Bore Type:Cylindrical Bore; Weight:0.340 kg; db (min):32 mm; Radial Clearance |
| VCM7011-E-2RSD-T-P4S-XL FAG high precision bearings | Locknut:KM40; Thread G:M200x3; D3:250 mm; C:32 mm; d1:180.00 mm; Lockwasher and Lockplates:MB40; Appropriate Hydraulic Nut:HMV40; L:176.00 mm; Weight:13.9 Kg; |
| VCM7007-E-2RSD-T-P4S-XL FAG high precision ball bearings | Seal Type:Viton Single Lip; Dimension J:380 mm; Series Type:Light Series; Pillow/Plummer Block Style:Split Cylindrical Ho; Housing Width:5.5 in; Note:This product line wa; Support Type:Two-Bolt Plummer Blo; Dimension L:445 mm; Cr - Dynamic Load Rating:71040 lbf; Dimension H2:310 mm; Maximum Speed:19 |
| VCM7018-E-2RSD-T-P4S-XL FAG high precision bearings | Bearing Weight:33 Kg; Y0 - ISO Factor4:2.91; C1(2) - Dynamic Radial Rating (Two-Rows):1400000 N; Reference Thermal Speed Rating (Grease):1300; Cage Type:EM; da - Inner Ring Backing Diameter:267.000 mm; Bore Taper:1/12; Design Unit:METRIC; Da - Outer Ring Backing Diameter:334.000 mm; e - ISO Factor3: |
| VCM7009-E-2RSD-T-P4S-XL FAG high precision bearings | Cone Part Number:14125A; da - Cone Frontface Backing Diameter:38.61 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; R - Cone Backface To Clear Radius1:3.560 mm; Series:14000; d:31.750 mm; r - Cup Backface To Clear Radius2:1.52 mm; C0 - Static Radial Rating:13900 lbf; K - Factor7:1.53; D:71.996 mm; e |
| VCM7017-E-2RSD-T-P4S-XL FAG high precision ball bearings | B - Cone Width:41 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):117; d:80 mm; Cg - Geometry Factor:0.109; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:31700 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:122000 lbf; DD:118.3 mm; a - |
| VCM7015-E-2RSD-T-P4S-XL FAG high precision bearings | Pre Install Clearance Max:0.0031 in; Dimension B:1.03 in; Dimension S:3.62 in; Dimension R:0.32 in; Eng Internal Radial Clearance - Max:0.0031; Grease Lubrication - M/N Seal:1600 rpm; C - Dynamic Load (Basic):49900 lb; Dimension G:3.140 in; Dimension L Exp:4.02 in; Pre Install Clearance Min:0.0020 i |
| VCM7010-E-2RSD-T-P4S-XL FAG precision ball bearings | Shaft Size :3-3/16 in; Locking Style:Single Concentric; Dimension E:6.81 in; C0 - Static Load:87200 lb; Shaft Size Type:Imperial; Bearing Number:22218; Dimension C:1.00 in; Y2 - Geometry Factor:4.31; Full Timken Part Number:QATU18A303SB; Pre Install Clearance Max:0.100 mm; C - Dynamic Loa |
| VCM7016-E-2RSD-T-P4S-XL FAG precision ball bearings | Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:4.8 mm; Series:32216; Aa - Cage-Cone Backface Clearance:3.3 mm; Cg - Geometry Factor:0.0828; R - Cone Backface To Clear Radius1:2.540 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:206000 N; db - Cone Backface Backing Diameter:93.9 |
| VCM7012-E-2RSD-T-P4S-XL FAG high precision bearings | D1 - Small Diameter O.D.:11.000 in; Weight:40.6 lb; Dynamic Load Rating:117000 lbf; H - Shoulder Diameter - Shaft:10.05 in; E - Shoulder Diameter - Housing:5.75 in; D - Bearing O.D.:11.0000 in; Bearing Type:Thrust Tapered Rolle; T1 - Ring Thickness:0.450 in; R - Fillet Radius Shaft (Max):0.22 in; d |
| VCM7006-E-2RSD-T-P4S-XL FAG high precision bearings | Dynamic Load Rating:20,800 N; Enclosure:Snap Ring Groove wit; Da (max):100 mm; a (max):2.5 mm; Snap Ring Width:1.1 mm; b (min):1.3 mm; Configuration:Single Row; Dx (min):112 mm; Factor fo:16.5; D:105 mm; r1:0.5 mm; B:16 mm; Radial Clearance:0.025 to 0.051 mm; Limiting Speed - Oil:7,200 rpm; Bore Typ |
| VCM7014-E-2RSD-T-P4S-XL FAG precision ball bearings | Eng Internal Radial Clearance - Min:0.0016; Dimension L Fix:3.51 in; Oil Lubrication - T Seal:3200 rpm; Pre Install Clearance Min:0.0016 in; Bearing Number:22213; Dimension RAA:0.77 in; Shaft Size Type:Metric; Full Timken Part Number:QAAFX13A060SB; Weight:19 lb; Dimension C:4 in; Locking Style:Doubl |
HCB71904-C-2RSD-T-P4S FAG precision ball bearings Video
FAG dimensions SPEC Spindle bearings HCB7016-C-2RSD
specifications sale FAG bearings D:80mm,d:125mm,B:22mm Spindle bearings HCB7016-C-2RSD-T-P4S
Super Precision Bearings Spindle bearings Super precision
FAG super precision bearings for main spindles stand for very high ... bearing seals (+100 °C) and lubricant must be observed, ... B 70 08-C-2-RSD -T-P4S-UL
FAG Bearings | Bearings Online Catalogue
Bearing HCB71903-E-T-P4S (Spindle bearings / FAG). Bearing HCB71904-C-2RSD-T-P4S (Spindle bearings / FAG). Bearing HCB71904-C-T-P4S (Spindle
Spindle bearings-Regus Bearing LLC(Regus Bearing GmbH)
740 records - ... LuK, and FAG brands. The globally active group of companies is a leading manufacturer of bearings worldwide and a renowned supplier to the
FAG HCS7010-CT-P4S + HCB71917-C-2RSD-T-P4S Bearing
We are one of the best dealers for Availability In Richardson and FAG HCB71917-C-2RSD-T-P4S. If you want to understand the Availability In Richardson and
FAG / INA Radial ball bearings - Export from Germany - All you
FAG / INA, Deep groove ball bearings. FAG / INA, 16002. FAG / INA, 16003 ... FAG / INA, 6000-C. FAG / INA, 6001-C. FAG / INA, 6002-C. FAG / INA, 6004-C
SKF, INA, NSK, FAG, INA etc ... - Bearings Catalogue Online
Page 4269. Bearing HCB7036-C-T-P4S (FAG) ... Bearing HCB7038-C-T-P4S (FAG). Bearing HCB7038-E-T-P4S (FAG) ... Bearing HCB71904-C-T-P4S (FAG)
Bearings FAG - Ball bearings - Tinex
HCB7007-C-2RSD-T-P4S-UL. 2.00. Details · LEŽAJ FAG HCB7008-C-T-P4S-UL. 97714. Bearings. Ball bearings. Spindle bearings (FAG). HCB7008-C-T-P4S-
Spindle bearings - B71904-C-2RSD-T-P4S - medias - Schaeffler
B71904-C-2RSD-T-P4S. Spindle bearings adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances