angular contact ball bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.
- 95 mm x 170 mm x 32 mm CYSD 7219DT angular contact ball bearings
- 40 mm
- 108000 lbf
- 12 mm x 28 mm x 8 mm NTN 7001CG/GMP42 angular contact ball bearings
- 100 mm
- Expansion Bearing (Floating)
- 25 mm x 62 mm x 17 mm SKF QJ 305 MA angular contact ball bearings
- 1-7/16 in
- Expansion Bearing (Floating)
- Toyana 7017 B angular contact ball bearings
- 2.1875 in
- 1700 lb
- 110 mm x 150 mm x 20 mm SNFA HB110 /S 7CE3 angular contact ball bearings
- 1 in
- Maximum of +800 °F
- 75 mm x 130 mm x 25 mm NTN 7215DT angular contact ball bearings
- 1.3750 in
- 2770 lbf
- 55 mm x 90 mm x 18 mm NSK 55BER10XE angular contact ball bearings
- 1.1875 in
- 6020 lbf